Economic Evaluation of Gold Nanoparticle (AuNP) Production Using Laser Ablation Synthesis Method

Authors

  • Salma Rahmadianti Universitas Pendidikan Indonesia, Indonesia
  • Kanthi Pawening Tyas Universitas Pendidikan Indonesia, Indonesia
  • Permata Maratussolihah Universitas Pendidikan Indonesia, Indonesia
  • Gabriela Chelvina Santiuly Girsang Universitas Pendidikan Indonesia, Indonesia
  • Asep Bayu Dani Nandiyanto Universitas Pendidikan Indonesia, Indonesia

DOI:

https://doi.org/10.53017/ujas.108

Keywords:

Gold nanoparticle, Laser ablation method, Economic evaluation

Abstract

Gold nanoparticles are very useful in various fields such as photoacoustic imaging microscopy, biotechnology, optoelectronics, and biomedicine. So the production of gold nanoparticle synthesis needs to be developed to an industrial scale. The purpose of this study is to determine the feasibility of the gold nanoparticle synthesis project using the laser ablation method on large-scale based on economic aspects. Several economic evaluation parameters are analyzed to inform the potential production of AuNP, such as GPM (Gross Profit Margin), BEP (Break-Even Point), CNPV (Cumulative Net Present Value), PBP (Payback Period), and PI (Profitability Index). The results showed that the production of AuNP nanoparticles was so prospective. Technical analysis to produce 100 g of AuNP nanoparticles per day shows the total cost incurred by the production process is 2,323,180 USD per year. PBP analysis show that investment will be profitable after more than 2.2 years. This project can compete with PBP capital market standards because of the short investment returns. To ensure the feasibility of a project, the project is estimated from ideal conditions to the worst case in production, including labor, sales, raw materials, utilities, and external conditions.

Downloads

Download data is not yet available.

References

J. M. Pingarron, P. Yanez-Sedeno, and A. González-Cortés, “Gold nanoparticle-based electrochemical biosensors,” Electrochimica Acta, vol. 53, no. 19, pp. 5848-5866, 2008.

F.K. Alanazi, A. A. Radwan, and I. A. Alsarra, “Biopharmaceutical applications of nanogold,” Saudi Pharmaceutical Journal, vol. 18, no. 4, pp. 179-193, 2010.

D. Kim, S. Jon, “Gold nanoparticles in image-guided cancer therapy,” Inorganica Chimica Acta, vol. 393, pp. 154-164, 2012.

S. Tedesco, H. Doyle, J. Blasco, G. Redmond and D. Sheehan, “Oxidative stress and toxicity of gold nanoparticles in Mytilus edulis,” Aquatic toxicology, vol. 100, no. 2, pp. 178-186, 2010.

V. Biju, “Chemical modifications and bioconjugate reactions of nanomaterials for sensing, imaging, drug delivery and therapy,” Chemical Society Reviews, vol. 43, no. 3, pp. 744-764, 2014.

T. Tsuzuki, “Commercial scale production of inorganic nanoparticles,” International journal of nanotechnology, vol. 6, no.5-6, pp. 567-578, 2009.

S. Deb, H. K. Patra, P. Lahiri, A. K. Dasgupta, K. Chakrabarti, and U. Chaudhuri, “Multistability in platelets and their response to gold nanoparticles,” Nanomedicine: Nanotechnology, Biology and Medicine, vol. 7, no. 4, pp. 376-384, 2011.

S. Eustis, and M. A. El-Sayed, “Why gold nanoparticles are more precious than pretty gold: noble metal surface plasmon resonance and its enhancement of the radiative and nonradiative properties of nanocrystals of different shapes,” Chemical society reviews, vol. 35, no. 3, pp. 209-217, 2006.

C. M. Muller, F. C. F. Mornaghini, and R. Spolenak, “Ordered arrays of faceted gold nanoparticles obtained by dewetting and nanosphere lithography,” Nanotechnology, vol. 19, no. 48, pp. 485306, 2008.

S. R. Hall, W. Shenton, H. Engelhardt, and S. Mann, “Site?specific organization of gold nanoparticles by biomolecular templating,” ChemPhysChem, vol. 2, no. 3, pp. 184-186, 2011.

J. Turkevich, P. C. Stevenson, and J. Hillier “A study of the nucleation and growth processes in the synthesis of colloidal gold,” Discussions of the Faraday Society, vol.11, pp. 55-75, 1951.

D. Wostek-Wojciechowska, J. K. Jeszka, P. Uznanski, C. Amiens, B. Chaudret, and P. Lecante, “Synthesis of gold nanoparticles in solid state by thermal decomposition of an organometallic precursor,” Materials Science-Poland, vol. 22, no. 4, pp. 407-413, 2004.

S. A. Dong, and S. P. Zhou, “Photochemical synthesis of colloidal gold nanoparticles,” Materials Science and Engineering: B, vol. 140, no. 3, pp. 153-159, 2007.

C. E. Zou, B. Yang, D. Bin, J. Wang, S. Li, P. Yang, and Y. Du, “Electrochemical synthesis of gold nanoparticles decorated flower-like graphene for high sensitivity detection of nitrite,” Journal of colloid and interface science, vol. 488, pp. 135-141, 2017.

K. Okitsu, M. Ashokkumar, F. Grieser, “Sonochemical synthesis of gold nanoparticles: effects of ultrasound frequency,” The Journal of Physical Chemistry B, vol. 109, no. 44, pp. 20673-20675, 2005.

S. Sun, P. Mendes, K. Critchley, S. Diegoli, M. Hanwell, S. D. Evans, and T. H. Richardson, “Fabrication of gold micro-and nanostructures by photolithographic exposure of thiol-stabilized gold nanoparticles,” Nano letters, vol. 6, no. 3, pp 345-350, 2006.

P. A. Schaal, A. Besmehn, E. Maynicke, M. Noyong, B. Beschoten, and U. Simon, “Electrically conducting nanopatterns formed by chemical e-Beam lithography via gold nanoparticle seeds,” Langmuir, vol. 28, no. 5, pp. 2448-2454, 2012.

S. Ahmed, S. A. Chaudhry, and S. Ikram, “A review on biogenic synthesis of ZnO nanoparticles using plant extracts and microbes: a prospect towards green chemistry,” Journal of Photochemistry and Photobiology B: Biology, vol. 166, pp. 272-284, 2017.

A. V. Simakin, V. V. Voronov, N. A. Kirichenko, G. A. Shafeev., “Nanoparticles produced by laser ablation of solids in liquid environment,” Applied Physics A, vol. 79, no. 4, pp. 1127- 1132, 2004.

A. F. M. Y. Haider, S. Sengupta, K. M. Abedin, and A. I. Talukder, “Fabrication of gold nanoparticles in water by laser ablation technique and their characterization,” Applied Physics A, vol. 105, no. 2, pp. 487-495, 2011.

M. I. Maulana, and A. B. D Nandiyanto, “Economic Evaluation of Different Solvents in the Production of LaCoO3 Nanoparticles Prepared by the Co-precipitation Method,” IJASC, vol. 1, no. 4, pp. 7-15, 2019.

F. Zahra, F. A. Utami, G. C. S. Girsang, S. Z. M. S. Mulya, V. D. Fentiana, Y . K. Putri, And A. B. D. Nandiyanto, “Economic evaluation of zinc oxide nanoparticle production through green synthesis method using Cassia fistula plant extract,” International Journal of Energetica, vol. 5, no. 2, pp. 18-24, 2020.

Downloads

Published

2021-12-12

How to Cite

Rahmadianti, S., Tyas, K. P., Maratussolihah, P., Girsang, G. C. S., & Nandiyanto, A. B. D. (2021). Economic Evaluation of Gold Nanoparticle (AuNP) Production Using Laser Ablation Synthesis Method. Urecol Journal. Part D: Applied Sciences, 1(2), 95–103. https://doi.org/10.53017/ujas.108

Issue

Section

Articles