Implementation of Palm Oil Waste Nano Technology to Increase the Durability of Road Pavement Materials: Proposed Research Roadmap

Authors

  • Sri Sunarjono Universitas Muhammadiyah Surakarta, Indonesia
  • Ngafwan Ngafwan Universitas Muhammadiyah Surakarta, Indonesia

DOI:

https://doi.org/10.53017/uje.138

Keywords:

Nano technology, Palm oil waste, Asphalt mixture durability, Research roadmap

Abstract

Many road pavements using asphalt mixtures in Indonesia are found to be not durable, especially heavy traffic roads. Even road damage often occurs early before the service life is reached. Many efforts have been made to improve the strength and durability of the mixture, but have not been effectively. For example, the use of fillers can increase the strength and durability of the mixture significantly, but its performance at low temperatures has an impact on the risk of hardening and cracking. The research objective is to propose the idea of implementing nanotechnology for palm oil waste materials to increase the durability of road pavement materials based on the research roadmap developed. The method used is through five approaches, namely: (i) review of research results on the durability of road pavement materials, (ii) review of research results on the implementation of nanotechnology in road pavement materials, (iii) research gaps, (iv) research ideas, and, (v) proposed research roadmap. A research roadmap for the implementation of nanotechnology to improve the durability of road pavement materials has been prepared. The substance of the research roadmap proposes three ideas, namely maximizing the function of nanomaterials as: (i) anti-aging agent, (ii) protecting water infiltration into the body of the asphalt mixture, and (iii) bonding agent between asphalt-aggregate.

Downloads

Download data is not yet available.

References

Schwab, K. 2016. The Global Competitiveness Report 2016-2017. Insight Report, World Economi Forum.

Munggarani, N.A. dan Wibowo, A., 2017. Kajian faktor-faktor penyebab kerusakan dini perkerasan jalan lentur dan pengaruhnya terhadap biaya penanganan. Jurnal Infrastruktur Vol. 3 No. 01 Juni 2017.

Sumiati., Hasan, A. 2013. Kerusakan Dini Lapisan Perkerasan Aspal Beton AC-BC. Jurnal Teknik Sipil Vol. 9 No. 2, 111-117.

Hatmoko, J.U.D., Setiadji, B.H., and Wibowo, M.A. 2019. Investigating causal factors of road damage: a case study. MATEC Web of Conferences 258, 0 (2019). https://doi.org/10.1051/matecconf/201925 802007.

Ojha, K.N. 2018. Overloading and Pavement Service Life—A Case Study on Narayanghat-Mugling Road, Nepal. Journal of Transportation Technologies > Vol.8 No.4, October 2018. https://doi.org/10.4236/jtts.2018.84019

Alkaissi, Z.A. 2020. Effect of high temperature and traffic loading on rutting performance of flexible pavement. Journal of King Saud University - Engineering Sciences, vol. 32 (1), January 2020, 1-4. https://doi.org/10.1016/j.jksues.2018.04.005.

F. Moreno-Navarro, M. Sol-Sanchez, Trave, G. and Gamez, M.C.R. 2017. “Fatigue cracking in asphalt mixtures: ´the effects of ageing and temperature,” Road Materials and Pavement Design, vol. 19, no. 3, pp. 561–570, 2017.

Deb, P. and Singh, L. 2022. Mix design, durability and strength enhancement of cold mix asphalt: a state-of-the-art review. Journal: Innovative Infrastructure Solutions, Issue 1(2022).

Sunarjono, S. dan Hidayati, N. 2021. Rekayasa Teknologi Keawetan Campuran Beraspal Bahan Perkerasan Jalan Untuk Mengatasi Kerusakan Dini Jalan Di Indonesia. Laporan Riset PTUPT Tahun 2021.

Sirin, O., Dalim K. Paul, D.K. and Kassem, E. 2018. State of the Art Study on Aging of Asphalt Mixtures and Use of Antioxidant Additives. Journal: Advances in Civil Engineering, Volume 2018, Article ID 3428961. https://doi.org/10.1155/2018/3428961.

Remisova, E. 2015. Study of mineral filler effect on asphalt mixtures properties. Bituminous Mixtures & Pavements VI – Nikolaides (Ed.), © 2015 Taylor & Francis Group, London, ISBN 978-1-138-02866-1. DOI: 10.1201/b18538-9.

Chen, Y., Xu, S., Tebaldi, G., Romeo, E. 2022. State of the Art: Role of mineral filler in asphalt mixture. Road Materials and Pavement Design, vol. 23 (2), 2022: 247-286. https://doi.org/10.1080/14680629.2020.1826351.

Yang, J. and Tighe, S. 2013. A review of advances of Nanotechnology in asphalt mixtures. 13th COTA International Conference of Transportation Professionals (CICTP 2013). Procedia - Social and Behavioral Sciences 96 ( 2013 ) 1269 – 1276, doi: 10.1016/j.sbspro. 2013.08.144.

Azahara, W.N.A.W., Bujanga, M., Jaya, R. P., Hainin, M.R., Aziz, M.M.A., and Ngadi, N. 2015. Application of Nanotechnology in Asphalt Binder: A Conspectus and Overview. Jurnal Teknologi, vol. 76, no. 14 (2015) 85–89, eISSN 2180–3722, DOI: 10.11113/jt.v76.5847.

Jordaan, G.J. and Steyn, W.J. 2021. Nanotechnology Incorporation into Road Pavement Design Based on Scientific Principles of Materials Chemistry and Engineering Physics Using New-Age (Nano) Modified Emulsion (NME) Stabilisation/Enhancement of Granular Materials. Journal of Applied Sciences. 2021,11, 8525. https://doi.org/10.3390/app11188525.

Ashish, K., Vishal, P., Rohan, P., Pranav, S., Sohail, S., Shashikant, B. 2019. Application of Nanomaterial in Road Pavement for Sustainable Built Environment. International Journal of Engineering Science and Computing, vol. 9 (5): May 2019.

Victory, W. 2022. A review on the utilization of waste material in asphalt pavements. Environmental Science and Pollution Research (2022), https://doi.org/10.1007/s11356-021-18245-0.

Ghale, S.R. and Pataskar, S. V., 2017. Comparison of Cold Mix and Hot Mix Asphalt. International Journal of Engineering Research in Mechanical and Civil Engineering, ISSN (on line) 2456-1290, Special Issue: Advanced Transportation System and Infrastruktur Development in Developing India.

Alkawaaz, N. G. and Qasim, H. A., 2016. Experimentally Evaluation of Durability Characteristics for Reclaimed Local Asphalt Pavement Mixtures. Imperial Journal of Interdiciplinary Research (IJIR) Vol-2, Issue-10, 2016, ISSN: 2454-1362.

Ahmed, N. G., Al-Badran, Y. M., Azeez, D.M. 2017. Laboratory Evaluastion of Moisture Damage and Durability of Hot Mix Asphalt (HMA). Journal of Engineering and Sustainable Development, vol.21 no 02, March 2017. ISSN 2520-0917.

Wang, X., Fan, Z., Wang, H., and Huang, M. 2019. Durability Evaluation Study for Crumb Rubber-Asphalt Pavement. Appl. Sci. 2019, 9, 3434, doi:10.3390/app9163434.

Amiri, P. 2011. Nano Materials in Asphalt and Tar, Australian Journal of Basic and Applied Sciences, 5(12), 3270-3273.

Teizer, J., Venugopal M., Teizer W. and Felkl J. 2012. Nanotechnology and Its Impact on Construction: Bridging the Gap between Researchers and Industry Professionals, Journal of Construction Engineering and Management, 138.

Jahromi S., Ghaffarpour, K.A. 2009. Effects of Nanoclay on Rheological Properties of Bitumen Binder. Construction and Building Materials, 23, 2894–2904.

Motlagh A. A., Kiasat A., Mirzaei E. and Birgani F. O. 2012. Bitumen Modification Using Carbon Nanotubes, World Applied Sciences Journal, 18 (4), 594-599.

Amirkhanian, A.N., Xiao, F., & Amirkhanian, S.N. 2011. Evaluation of high temperature rheological characteristics of asphalt binders with carbon nano particles. Journal of Testing and Evaluation, 39(4), 1 – 9.

Santagata, E., Baglieri, O., Tsantilis L., Dalmazzo D. 2012. Rheological Characterization of Bituminous Binders Modified with Carbon Nanotubes, Procedia - Social and Behavioral Sciences, 53, 546 – 555.

Yao H., You Z., Li L., Lee C. H., Wingard D., Yap Y. K., Shi X., Goh S. W. 2012 Properties and Chemical Bonding of Asphalt and Asphalt Mixtures Modified with Nanosilica, Journal of Materials in Civil Engineering. doi:10.1061/(ASCE)MT.1943-5533.0000690.

Jaskula, P. and Judycki, J. 2016. Durability of Asphalt Concrete Subjected to Deteriorating Effects of Water and Frost. Journal of Performance of Constructed Facilities, vol 30 (1): 2016. DOI:10.1061/(ASCE)CF.1943-5509.0000645.

TRB, 2014. Enhancing the Durability of Asphalt Pavement. Transportation Research Board, Transportation Research Circular Number E-C186, September 2014, Washington, D.C.

Bennert, T., 2011. Implementation of Performance-Based HMA Specialty Mixtures in New Jersey. Journal of the Association of Asphalt Paving Technologists, Vol 80.

Bennert, T., Daniel, J.S., and Mogawer, W., 2014. Strategie for Incorporating Higher RAP Pertcentages: Review of Northeast States Implementation Trials. Presented at 93rd Annual Meeting of the Transportation Research Board, Washington, D.C.

Muhammad, L., 2014. Development of a Lousiana’s Balanced Asphalt Mixture Design. Presented at 53rd Lousiana Asphalt Pavement Association Convention, May 30-June 3.

Sunarjono, S. dan Cendikia, W. F. 2020. Pengaruh Order Pencampuran Terhadap Propertis Dan Durabilitas Campuran Ac-Wc Menggunakan Portland Cement. Prosiding Seminar Nasional Teknik Sipil 2020, ISSN: 2459-9727.

Sunarjono, S., Hidayati, N., Pratama, A.I., 2020. Ketahanan Campuran AC-WC Menggunakan Lateks Terhadap Air. Jurnal Transportasi, Vol 20, No 2 (2020).

Al-Sabaeei, AM., Mustofa, BA., Sutanto, MH., Sunarjono, S., Bala, N. 2020. Aging and Rheological Properties of Latex and Crumb Rubber Modified Bitumen Using Dynamic Shear Rheometer. Journal of Engineering and Technological Sciences, Vol 52, No 3 (2020), Institute Teknologi Bandung.

H. Saleem, S. J. Zaidi, and N. A. Alnuaimi, “Recent advancements in the nanomaterial application in concrete and its ecological impact,” Materials (Basel)., vol. 14, no. 21, 2021, doi: 10.3390/ma14216387.

Z. V. Pisarenko, L. A. Ivanov, and Q. Wang, “Nanotechnology in construction: State of the art and future trends,” Nanotechnologies Constr., vol. 12, no. 4, pp. 223–231, 2020, doi: 10.15828/2075-8545-2020-12-4-223-231.

Engenharia, E.D. 2021. Iran Gomes da Rocha Segundo ECOLOGICAL PHOTOCATALYTIC.

A. A. Ali, “Nanotechnology in Civil Engineering Construction,” Int. J. Struct. Civ. Eng. Res., vol. 9, no. 1, pp. 87–90, 2020, doi: 10.18178/ijscer.9.1.87-90.

Q. Bianchi, Application of nano-silica in concrete. 2014.

A. M. Díez-Pascual, “Effect of graphene oxide on the properties of poly(3-Hydroxybutyrate-co-3-Hydroxyhexanoate),” Polymers (Basel)., vol. 13, no. 14, 2021, doi: 10.3390/polym13142233.

M. Han, Y. Tan, A. Meng, X. Xiong, Y. Wang, and H. Lv, “Preparation of chemical-physical hybrid crosslinking double network gel composite incorporated SBS modified asphalt,” Int. J. Pavement Eng., pp. 1–15, 2022, doi: 10.1080/10298436.2021.2022674.

M. Daniyal, A. Azam, and S. Akhtar, “Application of Nanomaterials in Civil Engineering,” no. October, pp. 169–189, 2018, doi: 10.1007/978-981-10-6214-8_6.

Z. Fu et al., “Rheological properties of asphalt binder modified by nano-TiO2/ZnO and basalt fiber,” Constr. Build. Mater., vol. 320, no. January, p. 126323, 2022, doi: 10.1016/j.conbuildmat.2022.126323.

Q. Zhang, T. Huang, and H. Qi, “Aging Resistance Properties of Nano-silica / SBS Composite Modified Asphalt.”

A. Tabakovi? and E. Schlangen, “Self-healing technology for asphalt pavements,” Adv. Polym. Sci., vol. 273, pp. 285–306, 2016, doi: 10.1007/12_2015_335.

S. Xu, X. Liu, A. Tabakovi?, and E. Schlangen, “A novel self-healing system: Towards a sustainable porous asphalt,” J. Clean. Prod., vol. 259, 2020, doi: 10.1016/j.jclepro.2020.120815.

Anupam, B.R. https.www.sciencedirect.comsciencearticleabspiiS0950061822000897 via%3Dihub.pdf.

Downloads

Published

2022-06-23

How to Cite

Sunarjono, S., & Ngafwan, N. (2022). Implementation of Palm Oil Waste Nano Technology to Increase the Durability of Road Pavement Materials: Proposed Research Roadmap. Urecol Journal. Part E: Engineering, 2(1), 9–18. https://doi.org/10.53017/uje.138

Most read articles by the same author(s)